Download more software & firmware

Here, you can download more software and firmware associated with Brain Products solutions.

actiCAP Control Software

When using BrainVision Recorder in combination with the actiCAP ControlSoftware (actiCAP ControlBox) for impedance measurements, please make sure you are using the latest version of the actiCAP ControlSoftware. You can review the Brain Products Software License Agreement here.

File converters

If you intend to organize and share your BrainVision raw data according to the EEG-BIDS standards, you can download and make use of our command line BV2BIDS converter. A brief description/usage of the tool can be found in this newsletter article.

BV2BIDS Converter

When using a LiveAmp amplifier and recording to memory card, please make sure to also download and install the LiveAmp File Converter. Detailed information on how to use the File Converter can be found in the BrainVision Recorder User Manual as well as the LiveAmp Operating Instructions .

LiveAmp File Converter 2.1.5

Software Development Kits (SDKs)

The packages below will help you to get direct access to our amplifiers without using a recording software (e.g., BrainVision Recorder).

BrainVision Amplifier SDK

Note: to download this file, you must first read and accept the license agreement. Click the download link to view and accept the license agreement. The download will start after you click the button confirming that you agree to the license agreement. You can also download the BrainAmp SDK License Agreement as a PDF for your records.

Further details on this SDK can be found in this newsletter article.

TriggerBox  Software

This installation package includes the TriggerBox Test IO, the TriggerBox Configuration tool as well as the drivers required to connect to the TriggerBox Plus. It also supports the former version TriggerBox (no “Plus”).

The TriggerBox Test IO is helpful to verify the trigger connections in your setup. It allows you to set bit levels individually and manually or run an automatic sequence to see whether the triggers arrive as they should. More detailed information is available in the operating instructions.

To configure the Ethernet and WiFi settings for the LSL marker streaming as well as output bit settings for TriggerBox Plus, the Configuation tool is used. More detailed information is available on our newsletter article “Out now! – TriggerBox Plus streams any trigger via LSL” and in the TriggerBox Plus operating instructions.

Note: BrainVision TriggerBox Test IO requires Microsoft Visual C++ runtime. If this package is not yet installed on your computer, please download and install the redistributable (vc_redist.x86.exe for 32 bit or vc_redist.x86.exe for 64 bit) from this Microsoft webpage before using TriggerBox Test IO.

Note: TriggerBox Test IO is only compatible with TriggerBox revision 2 (released in September 2015) or later.

Utilities

If you are experiencing issues trying to connect to actiCHamp-TurboLink from Recorder it could be due to Windows Defender. The actiCHamp-TurboLink tool allows you to reset the firewall rules for BrainVision Recorder and actiCHamp-TurboLink. For details, see Appendix E2 in the BrainVision Recorder 1.26 - User Manual .

actiCHamp-TurboLink Tool

Use the BrainVision LSL Viewer to monitor online LSL streams. Select one EEG stream and any number of irregular streams (for example, markers). Visualize EEG and AUX channels simultaneously and display Fast Fourier Transforms of up to four channels.

Visit bci.plus for more instructions on how to use this tool.

Note: BrainVision LSL Viewer requires Windows 10 (64 bit) operating system with Microsoft Visual C++ runtime. Please download and install the redistributable vc_redist.x64.exe from https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloads before using LSL viewer.

Need help?

For further information on any support related issue, please contact our Technical Support team.
To ensure the best support, please mention your dongle number in software-related enquiries.