BrainVision Analyzer 2.2.1 Info Page
Dongle upgrade: End of support for HASP HL dongles in Analyzer 2.2.1
Check for dongle technology as follows:
- Plug the dongle into a USB port of your local computer. For network dongles, you can perform the check also directly on the License Server.
- Open the interface of the dongle driver (referred to as the Sentinel Admin Control Center) by clicking or entering http://localhost:1947 into a web browser. Then select “Sentinel Keys” from the Options menu.
- Look for the dongle listed as “Local” under the column “Location” and check in the same line:
- If a button “Products” exists under the column “Actions”, it is a Sentinel HASP dongle.
→ Your dongle is already compatible with BrainVision Analyzer 2.2.1 and no upgrade is required. - If the button “Products” does not exist, it is a HASP HL dongle.
→ Your dongle requires an upgrade to be used with BrainVision Analyzer 2.2.1.
- If a button “Products” exists under the column “Actions”, it is a Sentinel HASP dongle.
- If your dongle is not listed as “Local” under “Location”, it means that it is a network key that is plugged remotely. Click on the server name displayed as “Location” to open the Sentinel Admin Control Center on the remote machine, and check here for the above.
Please note: Once a dongle is upgraded to Sentinel HASP technology, this dongle will no longer support Analyzer versions older than 2.0.3, including all versions of Analyzer 1. An upgraded dongle cannot be downgraded again.
The upgrade will be handled differently for network and single licenses. Please read the information below before submitting your request.
- If your dongle is a network license key, i.e. the dongle label starts with the letter N followed by five digits, your key needs to be replaced with a new Sentinel HASP network dongle providing the same licenses as your old dongle. Please submit your request via email (see section 4) or alternatively contact your local distributor about exchanging your network dongle. From January 1, 2022 replacement dongles for network licenses are subject to charge.
- If your dongle is a single license key, i.e., the dongle label starts with the letter U or V followed by five digits, your key can be upgraded by installing an update. To create your personal update, we will need a C2V file from your dongle. You can find all information about how to create a C2V file on this page (see “Create C2V” below ). Please submit your request via email and include your C2V file as an attachment (see section 4). Updates for single license dongles will be free of charge beyond January 1, 2022.
You can send your upgrade request to our Scientific Support team via email at support@brainproducts.com.
In order to facilitate processing of your request, please use the dongle label (or its Key ID) as the email subject. Please include the following information in the email: your full name and affiliation including the country where the dongle is normally used.
If your upgrade request is for a single license key, please generate a C2V file for your dongle (see section 5 for instructions) and attach this to the email.
To upgrade your HASP HL dongle, please provide a C2V file that you can create yourself following the steps below.
- Connect only the HASP HL dongle that should be upgraded to Sentinel HASP to the PC.
- Go to the local dongle configuration page.
- If not enabled, check the option “Generate C2V file for HASP key” under Configuration > Basic Settings
(confirm with Submit). If this option is not offered, please update your dongle driver first. - Go to “Sentinel Keys”.
- Click on [C2V] in the Actions column for the relevant dongle.
- Click [Create C2V File] and save the file.
- Include the generated C2V file in your dongle upgrade request via email (see section 4).
- Within the next days, you will receive an email with instructions how to apply the update to your dongle.