BrainVision Recorder: Multifunctional software for recording setup and execution
Recorder workspace wizard
A very convenient wizard menu structure guides you through the entire hardware setup and hardware/software filter configuration. Even selecting the hardware filters on a channel by channel basis is very easy and fast.
Switching between montages
The channel montages (original, bipolar and average) can be switched on the fly, to adjust the channel view to the specific experiment‘s needs.
The channel by channel impedance check is extremely simple: Each electrode is placed at the topographic position and its impedance value is displayed with a fully selectable color coding. The impedance check as well as all acquisition parameters are automatically stored and can be accessed from within the analysis software at any time.
Online evoked potential analysis
A complete evoked potential analysis can be performed in real-time directly in BrainVision Recorder and the segmented/averaged data can be stored together with the raw data.
A video module allows to capture images of the experimental subject which are synchronized with the incoming EEG data. This can be reviewed in the analysis software frame by frame while leafing through the acquired data.
Incoming data can be sent out to the network via the TCP/IP protocol using the Remote Data Access module to the BrainVision RecView software (or any homemade software) for real-time data analyses.
Interface to other software
BrainVision Recorder can be easily interfaced with other software solutions like Presentation®, E-Prime and more.
Simple, wizard-driven hardware setup
Channel-specific hardware and software filter configuration
Full support for sensors for psychophysiological signals
EEG-MR scanner synchronization
Real-time EEG-server (TCP/IP) for RecView, Neurofeedback, Biofeedback, BCI, ...
Remote control by OLE automation
Continuous, segmented and averaged data
Workspace properties (hardware and software parameters)
Triggers and events (16 bit)
Topographic impedance display
Continuous EEG- and psychophysiological data
Online segmentation, artifact rejection and averaging
Windows® 10 (64-bit): only BrainVision Recorder 1.21.0004 and higher
Windows® 11: only BrainVision Recorder 1.25.0101 and higher
Please note that certain Windows® operating systems do not support all amplifiers and/or hardware components. For details, please refer to the User Manual.
Intel Pentium III Processor 1 GHz or higher
Min. resolution 1,024 x 768 pixels and 32,768 colors
Windows® 10: min. 4 GB
Windows® 11: min. 8 GB
Free disk space
Min. 2 GB free hard-disk space
Additional storage requirements depend on the extent of the data to be processed.
A 21" monitor is recommended for more than 32 channels
Tutorial video on how to install BrainVision Recorder